PAC (Programmable Automation Controllers)
Tutti i dati e le caratteristiche riportate possono essere soggette a variazioni senza preavviso / All features and data can be changed without notice
Processore RISC Hitachi Sb2 a 32 bit, 20 MHz; ciclo di istruzione di 50 ns., pipeline a 5 stadi; indirizzamento bytes; moltiplicazione + accumulazione hardware
Multitasking di 16 programmi paralleli in circa 1 ms.
Processor RISC Hitachi SH32 a 32 bit, 20 MHz; instruction cycle of 50 ns., pipeline with 5 stadium; addressing 4 G bytes multiplication + hardware accumulation
Multitasking of 16 parallel programs in about 1 ms.
RAM 1Mbit RAM 1Mbit
FLASH Da 32 a 512Kbytes con kernel di debug FLASH From 32 to 512Kbytes with kernel of debug
Registri 16 a 32 bit di uso generale, 3 registri di controllo a 32 bit, 4 registri di sistema a 32 bit. Registers 16 to 32 bit of general use, 3 control registers to 32 bits, 4 system registers at 32 bits.
Hardware timers 5 timers molto evoluti a 32 bit; Hardware timers 5 evolved timers at 32 bit;
Canali seriali 4 RS-232 e 2 RS-485 Serial buses 4 RS-232 end 2 RS-485
CAN bus Tramite controllore Intel 82527 CAN bus Through controller Intel 82527
Display Display alfanumerico per diagnostica Display Alphanumeric display alfanumerico for diagnostics
Tastiera 3 pulsanti per impostazione dei parametri Keyboard 3 push button to set the parameters
Led utente N.3 led comandabili dall’utente per segnalazioni di corretto funzionamento o errori User Led N.3 led checked by the user for signalling the correct operating or the errors
Dip switches 8 dip switches utilizzabili e leggibili da programma Dip switches 8 dip switches usable for user setting
Orologio Batteria tampone; trimmer per regolazione ad alta precisione Clock Buffer battery; trimmer for regulation of high precision
Ingressi N.28 ingressi optoisolati PNP con led di monitor stato di cui 4 ad alta velocità configurabili PNP/NPN; Input N.28 input opt isolated PNP with monitor LED status of which 4 of high speed configurable PNP/NPN;
Uscite N.28 uscite optoisolate PNP da 0,5A, con led di monitor stato Output N.28 output opt isolated PNP of 0,5A, with status LED status
Ingresso encoder 3 degli ingressi possono essere usati come ingresso per un encoder incrementale PNP Encoder input 3 of the input can be used as input for an incremental encoder PNP
Ingressi analogici 2, range 0..10V, risoluzione del DAC 10 bit Analogical input 2, rank 0..5V, resolution of the DAC 10 bit
Morsetti Tutti i morsetti sono a molle per evitare falsi contatti Connectors The connectors are spring type
Alimentazione +10..35V cc con diodo di protezione contro le inversioni di polarità; alimentatore switching a bordo a bassissima dissipazione di potenza; corrente media richiesta a 24V: 90 mA Power supply +10..35V cc with protection diode against the inversions of polarity; supply switching on board with very low dissipation of power; middle current required 24V: 90 mA
POWER FAULT Gestione della mancanza di alimentazione a livello hardware; possibilità di selezionare INT o NMI su cadute di tensione all’ingresso del regolatore POWER FAULT Management of power supply lack to hardware level; possibility to select INT or NMI on voltage drop at the regulator input.
Sicurezze Watchdog incorporato escludibile con jumper Safety Watchdog incorporated switching off with jumper
Ritenzione dati Batteria per RAM e orologio sostituibile a caldo Data retention Battery for RAM and clock replaceable to heat;
Funzioni evolute

Sistema FULL DIGITAL  per il collegamento con azionamenti, terminali , PC, espansione degli I/O. Possibilità di collegamento con LETTORI DI BARCODE, PESE,  ETICHETTATRICI, SISTEMI DI VISIONE, SUPERVISORI, …Vedi Principali differenze tra PAC M10 e PLC

Evolved functions

FULL DIGITAL System for the connection with drives, terminals, PC, expansion of the I/O. Connection possibility with BARCODE READER, WEIGHING, LABELLING, PRINTING MACHINES, VISION SYSTEM, SUPERVISION See Different from PAC M10 to PLC

COD 004/2009 24060, Cenate Sopra (BG) Via Provinciale 65 Tel: 035/957006  Fax: 035/957007 E-Mail: uc@italianarobot.com